Low Noise High Pressure Centrifugal Fan

This Low Noise High Pressure Centrifugal Fan from Hebei Ketong manufacturer is primarily used in scenarios requiring high-pressure gas transport and stringent noise control. It is typically installed at the inlet or outlet of commercial building ventilation systems, medical equipment pipelines, precision electronics factory ventilation ducts, or environmental purification units to transport clean air, purified exhaust gas, low-concentration dust gases, or process circulating air.
This type of fan is typically supplied to construction companies, medical equipment manufacturers, electronics technology firms, commercial complex operators, or environmental engineering service providers.It meets the dual standards of high-pressure ventilation and low-noise environments. Hebei Ketong, a large-scale China-based manufacturer that accommodates bulk purchases, maintains on-hand stock, delivers swift order feedback and factory-floor favorable rates.

Product Parameters

Product Features

1. The Low Noise High Pressure Centrifugal Fan adopts an integrated design of "high-pressure aerodynamic optimization + multi-layer noise reduction." The impeller is optimized through fluid dynamics simulation, and combined with a soundproof casing and vibration-damping base, it achieves a maximum static pressure output of 5000Pa while keeping operating noise below 65dB (measured at 1 meter), balancing high-pressure performance with a quiet operating experience.
2. With a total pressure efficiency of 82%-88%, and through precise matching of the high-efficiency motor and aerodynamic structure, energy consumption is reduced by 12%-18% compared to ordinary high-pressure blowers. Long-term use can significantly save operating costs and is suitable for continuous operation scenarios.
3. Core components are made of high-strength, wear-resistant materials. The impeller is dynamically balanced (vibration amplitude ≤0.08mm), ensuring strong operational stability and long-term resistance to high-pressure airflow impact, with a service life exceeding 25,000 hours.
4.This product can be used for indoor ventilation and air exchange in ordinary factories and large buildings. It transports air and other natural gases that are harmless to human health and do not corrode steel materials. During operation, this fan requires that the gas stream contains no viscous substances. The concentration of dust and extremely hard particles must not exceed 150 mg/m³, and the gas temperature must not exceed 80°C.